5
detection results.
To connect earphones to the detector, insert the earphones’ 3.5mm plug into
the EAR jack on the control box.
Note: The detector’s internal speaker disconnects when you connect
earphones.
LISTENING SAFELY
To protect your hearing, follow these guidelines when you use earphones.
Set the volume to the lowest setting before you begin listening.
After you begin listening, adjust the volume to a comfortable level.
Do not listen at extremely high volume levels. Extended high
volume listening can lead to permanent hearing loss.
Once you set the volume, do not increase it. Over time, your ears
adapt to the volume level, so a volume level that does not cause
discomfort might still damage your hearing.
Traffic Safety
Do not wear earphones while operating your detector near high-traffic areas.
Even though some earphones are designed to let you hear some outside
sounds when listening at normal volume levels, they still can present a traffic
hazard.
FUNCTIONS AND INDICATORS
1.
A QUICK LOOK AT THE DETECTOR
a. DISC—Rotate the control clockwise away from ALL METAL to get DISC mode.
The DISC mode comes with auto ground balance. Rotate the control slowly