RiCOMA (Shenzhen) Co.,Ltd
A Passion for Excellence
Visit us at
Add.: Building B, ShenChangGang Science Park, Jinlong Road 1, Baolong Industrial Town,
Longgang District, Shenzhen, P.R.C
Tel.:+86-0755-25857576 Fax: +86-0755-25857773 - 30 -
www.ricoma.cn
Note: pay attention to operational safety, keep hands way from the cutter
and needle rod;
6. Trouble shooting for principal axis not being at zero position:
Errors shown as follows means the principal axis is not at zero (i.e. 100 degree)
, then click on directly the error prompt message, with
principal axis motor automatically working and turning to 100 degree.
Warning
Note: pay attention to operational safety, keep hands way from the cutter
and needle rod;
7. Prompt for pattern-out-of-frame:
After inputting pattern, if any error prompt message shown as follows occurs, it means
patter size exceeds the frame size and frame may be punched, therefore, switching to a
greater frame is the correction solution;
