161
6
Se
tti
ngs
You can adjust the brightness of the display to 7 levels.
1
Use the four-way controller (
23
) to select [Brightness Level]
in the [
W
Setting] menu.
2
Use the four-way controller (
45
) to adjust the brightness.
F
Dark
G
Normal
H
Bright
You can save the battery power by setting the display to dim automatically when
no operation is performed for a fixed time. After the Power Saving function has
been activated, the display returns to the ordinary brightness if any button is
pressed.
1
Use the four-way controller (
23
) to select [Power Saving] in
the [
W
Setting] menu.
2
Press the four-way controller (
5
).
A pull-down menu appears.
3
Use the four-way controller (
23
) to select the time until the
camera enters Power Saving mode.
Choose from [2min.], [1min.], [30sec.], [15sec.], [5sec.] or [Off].
4
Press the
4
button.
The setting is saved.
Adjusting the Brightness of the Display
Using the Power Saving Function
• Power Saving does not function in the following situations:
- While taking pictures in
j
(Continuous Shooting) and
c
(Burst
Shooting) modes
- In playback mode
- During movie recording
- While the camera is connected to a computer
- When using the AC adapter
- While a menu is being displayed
- In
(Digital Microscope) mode
• When no operation is performed after the camera is turned on, Power
Saving is activated only after 15 seconds elapse even if [5sec.] is set.
