Copying from the Bypass Tray
27
2
F
Enter the horizontal size of the paper (Horiz.) with the number keys, and
then press the
{
OK
}
key.
G
Enter the vertical size of the paper (Vert.) with the number keys, and then
press the
{
OK
}
key.
The “
Programmed
” message appears.
H
Place the originals, and then press the
{
Start
}
key.
I
When the copy job is finished, press the
{
Clear Modes
}
key to clear the set-
tings.
Note
❒
, press the
{
Clear/Stop
}
key, and then
enter the value again.
Reference
p.23 “Loading Paper on the Bypass Tray”
When Copying onto OHP Transparencies
When copying onto OHP transparencies, select
[
OHP (Transparency)
]
in Paper
Type.
Important
❒
OHP transparencies must be loaded face down in the tray with the notched
corner of the sheet in the appropriate corner of the tray.
❒
To prevent multiple sheets from being fed at once, fan OHP transparencies
before placing them on the tray.
❒
Remove copied sheets from the Internal Tray one by one.
A
Select
[
Byp.
]
using
{U}
or
{T}
.
B
Load OHP transparencies face down on the bypass tray.
C
Press the
{
q
}
key.
Summary of Contents for VD0107571
