Ricoh VB2807800, Operating Instructions Copy Reference

Page: 22 / 76

Placing Originals
16
1
Placing Originals
Note
❒
Take care to place originals only af-
ter any correction fluid and ink has
completely dried. Not taking this
precaution could cause marks on
the exposure glass that will be cop-
ied onto paper.
Reference
For original sizes you can set, see
p.13 “Originals” .
Original Orientation
You can set the original orientation in
the following ways.
This function is useful for copying
torn or large originals.
Note
❒
Originals should normally be
aligned to the rear left corner.
However, some copy functions
may produce different results de-
pending on the orientation of the
originals. For details, see the expla-
nations of each function.
Placing Originals on the
Exposure Glass
A
Lift the exposure glass cover, AR-
DF.
Important
❒
Do not lift the exposure glass
cover, ARDF forcefully. If you
do, the ARDF cover might open
or be damaged.
B
Place the original face down on
the exposure glass. It should be
aligned with the rear left corner.
1.
Positioning mark
2.
Left scale
Note
❒
Start with the first page to be
copied.
C
Lower the exposure glass cover,
ARDF.
Originals ARDF Exposure
glass
set23EE
ABU025S