Ricoh TCRU/ORU Troubleshooting Manual Download Page 129

Page: 129 / 184

Cleaning the Paper Feed Path in the Multi Bypass Tray

Clean the side fences and front guide.

CEZ587

Clean the paper feed rollers.

Clean the guide board.

CEZ506

After cleaning, restore the machine so that it resumes operation.

• For details about detaching and reattaching the parts, see the Replacement Guide.

Cleaning the Paper Feed Rollers and Paper Feed Belt in the Interposer

Clean the paper feed belt and paper feed rollers in the interposer.
The procedure is explained using the interposer upper tray. The procedure is the same for the lower tray.

Remove the loaded paper.

Open the upper cover, and then detach the paper feed unit.

Pull it out slightly, release the metal shaft, and then detach it.

Cleaning the Paper Feed Path

127

Summary of Contents for TCRU/ORU

























































































































































































Search results

Summary of Contents for TCRU/ORU

Reviews:

Related manuals for TCRU/ORU

Brands by name

Popular brands

Ricoh TCRU/ORU, Troubleshooting Manual

Search results

Summary of Contents for TCRU/ORU

Reviews:

Related manuals for TCRU/ORU

Brands by name

Popular brands