Ricoh SP C360DNW Operating Instructions Manual Download Page 5

Page: 5 / 56

1. Before Using the Printer

This manual describes the settings required to prepare the printer for use, and the procedure for
installing the driver.

Setting Up Operations

Operation target

Things to do

The printer that is turned on for the first time

DUP360

Installation Settings starts when the printer is
turned on for the first time. Proceed with the
wizard to configure the printer for use. The
settings you can configure in Installation Settings
are as follows:

• Time Zone
• Date and Time
• Daylight Saving Time
• Network

For details, see page 7 "Configuring the Initial
Settings of the Printer".

Your computer that is connected to the same

network as the printer

DUP368

Use the CD-ROM provided with the printer to
install the driver to your computer.
For details, see page 19 "Installing the Driver".

• You can also download the driver from the manufacturer's website and install it to your computer.

For details, see the manufacturer's website.

Summary of Contents for SP C360DNW

























































Search results

Summary of Contents for SP C360DNW

Reviews:

Related manuals for SP C360DNW

Brands by name

Popular brands

Ricoh SP C360DNW, Operating Instructions Manual

Search results

Summary of Contents for SP C360DNW

Reviews:

Related manuals for SP C360DNW

Brands by name

Popular brands