Safety Precautions
5
Important Information for
Australia
IMPORTANT-For Your Safety
To ensure safe operation the three-pin plug supplied
must be inserted only into a standard threepin power
point which is effectively grounded through the
normal household wiring.
Extension cords used with the equipment must be
three-conductor and be correctly wired to provide
connection to ground. Incorrectly wired extension
cords are a major cause of fatalities.
The fact that the equipment operates satisfactorily
does not imply that the power is grounded and that
the installation is completely safe. For your safety, if
in any doubt about the effective grounding of the
power, consult a qualified electrician.
Important safety instructions
1 Read all of these instructions.
2 Save them for later reference.
3 Follow all warnings and instructions marked on the
product.
4 Unplug this product from the wall socket before
cleaning the outside of the machine and the
scanner glass. DO NOT use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
5 DO NOT use this product near water.
6 DO NOT place this product on an unstable cart,
stand, or table. The product may fall, causing
serious damage to the product.
7 Slots and openings in the casing at the back or
bottom are provided for ventilation; to ensure
reliable operation of the product and to protect it
from overheating, these openings must not be
blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug,
or other similar surface. This product should never
be placed near or over a radiator or heater. This
product should never be placed in a built-in
installation unless adequate ventilation is
provided.
8 This product should be connected to an AC power
source within the range indicated on the rating
label. DO NOT connect it to a DC power source or
inverter. If you are not sure, contact a qualified
electrician.
9 This product is equipped with a 3-wire grounded
plug, a plug having a third (grounded) pin. This
plug will only fit into a grounded power outlet. This
is a safety feature. If you are unable to insert the
plug into the outlet, call your electrician to replace
your obsolete outlet. DO NOT defeat the purpose
of the grounded plug.
10 DO NOT place anything on top of the power cord
including this machine. DO NOT allow the power
cord to be stepped on.
11 DO NOT touch a document during printing.
12 Never push objects of any kind into this product
through cabinet slots, since they may touch
dangerous voltage points or short out parts
resulting in a risk of fire or electric shock. Never
spill liquid of any kind on the product.
13 DO NOT attempt to service this product yourself,
because opening or removing covers may expose
you to dangerous voltage points and/or other risks.
Refer all servicing to service personnel.
14 Wait until pages have exited the machine before
picking them up.
15 Unplug this product from the wall outlet and refer
servicing to Authorised Service Personnel under
the following conditions:
When the power cord is damaged or frayed.
If liquid has been spilled into the product.
If the product has been exposed to rain or
water.
If the product does not operate normally when
the operating instructions are followed. Adjust
only those controls that are covered by the
operating instructions. Incorrect adjustment of
other controls may result in damage and will
often require extensive work by a qualified
technician to restore the product to normal
operation.
If the product has been dropped or the casing
has been damaged.
If the product exhibits a distinct change in
performance, indicating a need for service.
Summary of Contents for SP 1200S
Page 26: ...M086 6140 GB ...
