Ricoh SP 1000S, Operating Instructions Manual

Page: 21 / 35

SP 1000S
- 18 -
4 - Parameters/Setup
Parameters/
Setup
You can setup your machine as you like depending on the
use. You will find in this chapter description of the
functions.
You can print the functions guide and the available setup
of your multifunction machine.
Language
This setting enables you to choose the menu language of
your choice. By default, the multifunction machine is set
to English.
To select the language:
203 - SETUP / GEOGRAPHICAL / LANGUAGE
1 Press , enter 203 using the keypad. Confirm with
OK .
2 Select the required language using and ,
then press the OK button to confirm.
3 To exit this menu, press .
Technical Parameters
As delivered your machine is preset by default. However,
you may adjust it to meet your requirements by resetting
the technical parameters.
To set the technical parameters:
29 - SETUP / TECHNICALS
1 Select the desired parameter and confirm with OK .
2 With the buttons or , modify the parameter
settings by following the table below and press OK .
Parameter Signification
8 - Eco energy Choosing the printer standby
delay: the printer will switch to
standby after a delay (in minutes)
of NON-operation or during the
period of time of your choice.
79 - Toner
Management This parameter helps you manage
the consumable. When set to
W
ITH
[0-10%], you can only replace the
toner cartridge when the toner has
reached the threshold.
If ever you need to replace the
toner cartridge before the toner
near end, set the parameter to
W
ITH
[0-100%] and proceed with
the toner cartridge replacement
(see chapter
Maintenance, page
28 ).
Disabling the toner management
(parameter set to
W
ITHOUT
) is
strongly not recommended as you
may spill toner in your print
mechanism. When set to
W
ITHOUT
,
the screen displays T
ONER
? %.
80 - Toner save Makes printing lighter to save toner
cartridge ink.
93 - Replace format Page format change. This
parameter allows you to print a
LETTER format document on A4
pages using the LETTER/A4
setting.