Ricoh SAVIN A741 Manual Download Page 14

Page: 14 / 76

A741

Print Server Manual

2.3

A741 internal cabling

Mount the internal cable and brackets as per A741 Repro System
installation guide (provided separately).

2.4

PC Specifications

Please make sure that the Server PC meets the following (minimum)
specifications

♦

Pentium PRO / Pentium II 200Mhz or faster

♦

128Mb of internal memory

2.5

PCI card installation

Remove the power cable from the PC.
Open the PC housing.
Install the A741 Repro Card into a free PCI slot.
Quick test:

•

Connect the A741 signal cable to the controller.

•

Switch-on the PC and A741 and wait until the A741 is ready.

•

Make sure the A741 is on-line.

•

Press the small button at the corner of the PCI card. This should give a

test print as seen below:

Note:

For a more detailed test procedure see chapter: 4.9,

LBTEST

See also correct positioning of the PCI card, chapter: 4.4.3,

Select the correct

PCI slot for the A741 Repro System card

Bracket to

order

Summary of Contents for SAVIN A741













































































Search results

Summary of Contents for SAVIN A741

Reviews:

Related manuals for SAVIN A741

Brands by name

Popular brands

Ricoh SAVIN A741, Manual

Search results

Summary of Contents for SAVIN A741

Reviews:

Related manuals for SAVIN A741

Brands by name

Popular brands