1.Install
12
12.
Hold double-feed sensor 1 as shown [A], and then connect the harness.
13.
Insert the blade of the bracket [B] into the slot.
14.
Fasten the sensor bracket [A], and then close the clamp.
15.
Thread the harness through the three clamps [B] and then close them.
16.
Set the upper guide as shown, and then gather these items from the accessories.
[A] Shielded harnesses
[B] Double-feed sensor 2
[C] Screws (M3x8)
17.
Connect the harness to the sensor board [A].