PEN
SETTINGS
HPGL/2 - Plotter Defaults
These settings are the standard defaults or plotter defaults. They
are only used if you have activated the setting "File" on the card
"Misc" in the sections "Pen source" and "Color source" but there
are no details for pen thickness and pen color in the corre-
sponding plot file!
If instead of these presets you want to use special settings for
your current print orders, instead of "File" you must activate
"Custom" at this point, where you can then adjust your individual
settings on the cards "Pen" and "Color".
The settings have the following meanings:
•
Default
If you activate "Default", the plotter uses the settings stipulated
here for the printout. They correspond to the standard values of
an HP DesignJet 1055 and cannot be changed.
•
Black / White
The printout is produced in black-and-white. Any possible grey
shades are ignored. But the pen size can be changed.
RW-480 CLIENTS 61
Summary of Contents for RW-480 PLOTCLIENT WIN
