Ricoh PRO TF6215, Operating Instructions Manual

Page: 48 / 116

Test Printing
Print a test pattern and check whether or not there are discharge defects such as nozzle clogging
(blurring or drop-out of printing).
Performing Test Printing
1. Set the media for test printing on the original position (0,0) of the table.
For details about how to set media, see page 54 "Setting Media on a Table".
2. Click the [Task Print] tab.
3. Specify the print-start position of the X-coordinate.
For details about how to set the print-start position, see page 59 "Changing Print-start Position".
4. Click [ ] on the tool bar to make the carriage move to the original position.
5. Click [Printhead Status].
The [Medium Thickness] screen is displayed.
6. Click [Auto Detect] on the [Medium Thickness] screen.
The message screen is displayed.
3. Basic Operations
46