Ricoh Pro L5130 Operating Instructions Manual Download Page 94

Page: 94 / 264

• The machine cannot adjust the media feed quantity automatically for transparent or colored media.

Adjust the media feed quantity manually. For details, see page 92 "Adjusting the Media Feed
Quantity Manually".

Adjusting the Media Feed Quantity Automatically

The machine prints the test pattern of the media feed adjustment, and then adjusts the media feed
quantity automatically.

Press the [Standard Procedure] key.

DWU103

Press [Media Feed Adjustment].

Press [Auto].

Select a print mode from [6 Pass] or [8 Pass / 12 Pass / 16 Pass / 32 Pass].

If using the machine with white ink, select a print mode from [6 Pass], [8 Pass / 12 Pass / 16 Pass],
or [32 Pass / 12 Pass (White)].

Press [Execute].

The test pattern of the media feed adjustment is printed, and then the media feed quantity
adjustment is performed.

Press [Confirm].

Press [End].

Adjusting the Media Feed Quantity Manually

You can print the test pattern of the media feed adjustment, and then adjust the media feed quantity
manually.

• If the control panel is not used for 30 minutes, the adjustment value entry menu is canceled and the

Home screen returns. If this happens, carry out the adjustment procedure again from the beginning.

2. Basic Operations

Summary of Contents for Pro L5130









































































































































































































































































Search results

Summary of Contents for Pro L5130

Reviews:

Related manuals for Pro L5130

Brands by name

Popular brands

Ricoh Pro L5130, Operating Instructions Manual

Search results

Summary of Contents for Pro L5130

Reviews:

Related manuals for Pro L5130

Brands by name

Popular brands