Ricoh Pro C5100S, Operating Instructions Manual

Page: 104 / 124

Setting Items Max. Value Min. Value Step Unit
[Ppr Trns CV Control Duration: FC: Side 2] 100 0 1 ms
62: [Ppr Trns Contact and Disengage Mode]
Specify whether or not to enable the paper transfer contact/separation mode.
If [On] is selected, the paper transfer roller separates from the intermediate transfer belt while paper is
transferred.
Use this to reduce the jitter
*1
produced when thick paper is used for printing.
• [On] is specified as the default for paper of Paper Weight 5 or greater.
Setting Items Values
[Paper Transfer Contact and Disengage Mode] [On]
[Off]
*1 The jitter occurs when the leading or trailing edge of paper that passes through the paper transfer unit is
transmitted to the drum unit via the immediate transfer belt, causing banding.
63: [Adjust Contact Timing of Ppr Trns]
Adjust the timing for the intermediate transfer belt and the paper transfer unit to come into contact during
paper contact/ separation.
Use this to reduce the jitter
*1
produced during paper contact if it cannot be reduced sufficiently by [Ppr
Trns Contact and Disengage Mode]. Also, use this to reduce the image quality degradation during the
contact.
To adjust the contact timing, press [−] to make the paper contact before its leading edge enters the
paper transfer roller, and press [+] to make it contact after its leading edge enters the paper transfer
roller.
Setting Items Max. Value Min. Value Step Unit
[Adjust Contact Timing of Paper Transfer] 10 -5 1 mm
*1 The jitter occurs when the leading or trailing edge of paper that passes through the paper transfer unit is
transmitted to the drum unit via the immediate transfer belt, causing banding.
4. Details of Menu Items in Advanced Settings
102