Ricoh Priport DX 4640PD, Operating Instructions Manual, Page: 33 / 240

21
Control Panel
1.
Screen contrast knob
Use to adjust the brightness of the dis-
play panel.
2.
{
Image Position
}
key
Press to activate the position setting keys.
3. {
User Tools
}
key
Press to change the default settings to
meet your requirements.
4.
Position Setting keys
Press to adjust the position of printed im-
ages.
5. {
Printer Settings
}
key
Press to change the default settings for
online printing.
6.
Indicators
M
: Open Cover/Unit indicator. See p.174
“
M
When the Open Cover/Unit Indica-
tor Lights”.
Let you know the status of the machine.
u
: Key Counter indicator. The light
turns on when Key Counter mode is on
and
[ Restricted Access ] is on in the settings
and the Key Counter or Key card is not
set. If
[ User Code Management ] is On, The
light turns on when the user code entry
screen is displayed. See p.188 “Adminis-
trator Tools”
j
: Add Ink indicator. See p.152 “
j
Ad-
ding Ink”.
C
: Master End indicator. See p.154
“
C
Replacing the Master Roll”.
B
: Load Paper indicator. See p.150
“
B
Loading Paper”.
k
: Master Eject indicator. See p.175
“
k
Removing the Used Master”.
x
: Misfeed indicator. See p.157 “
x
Clearing Misfeeds”.
7. {
Check Modes
}
key
Press this key to check settings.
8. {
Program
}
key
Press to register frequently used settings,
or to recall registered settings.
9. {
Clear Modes
}
key
Press to clear previously entered print job
settings.
10. {
Hold Data-in
}
key
Press to reject the online print temporarily.
11.
{
Master Making
}
mode select key
Press to select the master making mode.
12. {
Auto Cycle
}
key
Press to make masters and prints in a sin-
gle operation.
13. {
Print
}
mode select key
Press to select the print mode.
14.
Main power indicator
The main power indicator lights up when
the main switch is turned on.
AUX201S