manualshive.com logo in svg

Ricoh Priport DX 4640PD, Operating Instructions Manual, Page: 26 / 240

Share
Download
Ricoh Priport DX 4640PD Operating Instructions Manual Download Page 26

14

Guide To Components

1.

Exposure glass cover (optional) or

Auto Document Feeder capable of
scanning both sides of a sheet
(ARDF) (optional)

Lower this cover over an original on the
exposure glass. If you have the ARDF,
load a stack of originals here. They will
be fed automatically, one by one.
(The illustration shows the ARDF.)

2.

Control panel

See p.21 “Control Panel”.

3.

Front cover

Open to access the inside of the machine.

4.

Master making unit

Open this unit when installing the mas-
ter.

5.

Paper feed side plates

Prevent paper skewing.

6.

Paper feed tray

Load paper here.

7.

Extender

Slide out when loading larger paper.

8.

Paper feed tray down key

Press to lower the paper feed tray.

9.

Paper feed side plates knob lock

lever

Locks the paper feed side plates.

10.

Paper feed side plates knob

Use to move the side plates.

AUY026S

Summary of Contents for Priport DX 4640PD

















































































































































































































































Reviews:

No comments