English
Troubleshooting
Problem: Image is reversed
Select “Default Settings 1-->Projection Mode” from the OSD and
adjust the projection direction.
Problem: Lamp burns out or makes a popping sound
When the lamp reaches its end of life, it will burn out and may
make a loud popping sound. If this happens, the projector will
not turn on until the lamp module has been replaced. To replace
the lamp, follow the procedures in the “Replacing the Lamp”.
(refer to page 51)
Summary of Contents for PJ X5260
Page 59: ...2012...
Page 60: ...EN GB Y017 6220 User s Manual...
