English
29
English
Basic Operations
Warning Indicator
When the “Temp” indicator flashes amber (3 secs on,
1 sec off, ) and the message below displays on-screen,
it indicates the air vents might be blocked or ambient
temperature may be above 40° C overheated. Ensure
that the air vents are not blocked and that the ambient
temperature is within operating range. If the problem
persists, please contact the vendor.
Warning
The projector will switch off automatically
Over temperature
Please contact a service center for repair
When the “Temp” indicator flashes red (2 secs on, 0.5 sec
off) and the message below displays on-screen, it indicates
one of the fans has failed. The projector will automatically
shut itself down.
Warning
The projector will switch off automatically
FAN LOCKED
Please contact a service center for repair
When the “LED” indicator turns amber, it indicates the
LED failure. The projector will shut down.
In case of the
fan failure, the
projector shuts down
automatically. Clear
the projector mode by
pressing and holding
the “Power” button for
10 seconds. Please wait
for about 5 minutes and
try to power up again.
Note
