background image

• Do not place or store the machine in a location where direct sunlight or heat generation might

occur. The heat may deform or wear out the exterior parts or negatively affect internal parts.
Doing so could result in fire.

• Do not place low heat resistant material near the exhaust vents. Hot air may come from the

exhaust vents, resulting in damage to the machine or an accident.

• Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal

components.

Handling Power Cords and Power Cord Plugs

This section explains safety precautions about handling power cords and power cord plugs.

• Do not use any power sources other than those that match the specifications shown in this

manual. Doing so could result in fire or electric shock.

• Do not damage, break, or modify the power cord. Also, do not place heavy objects on the

power cord, or pull the cord or bend it severely. Doing so could result in fire or electric shock.

• Touching the prongs of the power cable's plug with anything metallic constitutes a fire and

electric shock hazard.

• The supplied power cord is for use with this machine only. Do not use it with other appliances.

Doing so could result in fire or electric shock.

• It is dangerous to handle the power cord plug with wet hands. Doing so could result in electric

shock.

• Be sure to disconnect the plug from the wall outlet at least once a year and check for the

following:

• There are burn marks on the plug.
• The prongs on the plug are deformed.

• If any of the above conditions exist, do not use the plug and consult your dealer or service

representative. Use of the plug could result in fire or electric shock.

Safety Precautions to Be Followed

5

Summary of Contents for PJ WX3351IN





























Reviews: