Ricoh PJ WX3351IN, User Manual

Page: 9 / 28

• Power Source
220–240 V, 1.7A or more, 50/60Hz
120 V, 3.7A or more, 60Hz
Please be sure to connect the power cord to a power source as above.
Handling the Main Machine
This section explains safety precautions about handling the main machine.
• If the machine emits smoke or odours, or if it behaves unusually, you must turn off its power
immediately. After turning off the power, be sure to disconnect the power cord plug from the
wall outlet. Then contact your service representative and report the problem. Do not use the
machine. Doing so could result in fire or electric shock.
• If metal objects, or water or other fluids fall inside this machine, you must turn off its power
immediately. After turning off the power, be sure to disconnect the power cord plug from the
wall outlet. Then contact your service representative and report the problem. Do not use the
machine. Doing so could result in fire or electric shock.
• Do not touch this machine if a lightning strike occurs in the immediate vicinity. Doing so could
result in electric shock.
• The following explains the warning messages on the plastic bag used in this product's
packaging.
• Keep the polythene materials (bags, etc.) supplied with this machine away from babies
and small children at all times. Suffocation can result if polythene materials are brought into
contact with the mouth or nose.
• If the machine topples, or if a cover or other part gets broken, you must turn off its power
immediately. After turning off the power, be sure to disconnect the power cord plug from the
wall outlet. Then contact your service representative and report the problem. Do not use the
machine. Doing so could result in fire or electric shock.
• The machine may be very hot after it is turned off, especially the vents and the lower part of the
unit where the lamp is located. Avoid touching these areas. Doing so may result in burns.
• Do not place the machine on other equipment or vice versa. Doing so may cause heat buildup
inside the machine or cause the other equipment to malfunction.
Safety Precautions to Be Followed
7