68
English
LAN Control
Function button: When you click a button, the corresponding function
will turn ON/OFF. (Function of the time of ON is described here.)
Auto Source
You will be automatically switched to the
next input when the input signal is lost.
High Altitude
The projector is switched to High Altitude
mode. Use this mode if the altitude is higher
than 2500ft (750m).
3D Sync Invert
The default polarity in projector is
automatically reversed and synced with your
DLP Link 3D glasses.
Adjustment button: Projector can be adjusted by +/ - button.
Auto Power
Off (Min.)
Set the countdown timer interval in minutes.
Filter Remind
Set the maximum
fi
lter time usage.
Brightness
Adjust brightness by +/ - button.
Value will return to the initial value when you
click the Reset button.
Contrast
Adjust contrast by +/- button.
Value will return to the initial value when you
click the Reset button.
Sharpness
Adjust sharpness by +/- button.
Value will return to the initial value when you
click the Reset button.
Saturation
Adjust saturation by +/- button.
Value will return to the initial value when you
click the Reset button.
Phase
Adjust phase by +/- button.
Value will return to the initial value when you
click the Reset button.
Clock
Adjust clock by +/- button.
Value will return to the initial value when you
click the Reset button.
H.Position
Adjust horizontal position by +/- button.
Value will return to the initial value when you
click the Reset button.
