background image

4

English

Usage Notice

■ 

Caution-

Do not use lens cap when projector is powered 

on.

■ 

Caution-

This projector will detect the life of the lamp 

itself. Be sure to change the lamp when it shows 

warning messages.

■ 

Caution-

Never operate this unit on AC power during 

a thunderstorm. If you see lightning or hear 

thunder, never touch the unit, cables and/

or peripherals. An electric surge caused by 

the storm, may result in an electrical shock or 

damage to the unit.

■ 

Caution-

Never push objects of any kind into this product 

through openings as they may touch dangerous 

voltage points or short-out parts that could result 

in a fire or electric shock. Never spill liquid of 

any kind on the product.

■ 

Caution-

Do not place or keep the projector within the 

reach of the children. It may fall or tip over, 

possibly causing serious injury.

■ 

Caution-

Do not stack other equipment on this product 

and do not place this product on other 

equipment. The top and bottom surface of this 

product increase in temperature during normal 

use and may damage the other unit.

■ 

Caution-

Do not use attachments not recommended by 

RICOH. Use of an incompatible attachments 

could cause hazards or damage to the product.

■ 

Caution-

Do not place this product on an unstable cart, 

stand, tripod, bracket, or table. The product may 

fall, causing serious injury to a child or adult, 

and serious damage to the product.

Summary of Contents for PJ S2240
































































Reviews: