Ricoh PJ LW3000ST Field Service Manual Download Page 7

Page: 7 / 130

Symbols, Abbreviations and Trademarks

This manual uses several symbols and abbreviations. The meaning of those symbols and abbreviations
are as follows:

Screw

Connector

Trademarks

• DLP is trademarks of Texas Instruments.
• IBM is a trademark or registered trademark of International Business Machines Corporation.
• Macintosh, Mac OS X, iMac, and PowerBook are trademarks of Apple Inc., registered in the U.S.

and other countries.

• Microsoft, Windows, Windows Vista, Internet Explorer and PowerPoint are either a registered

trademark or trademark of Microsoft Corporation in the United States and/or other countries.

• HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC.

• Other product and company names mentioned in this user’s manual may be the trademarks or

registered trademarks of their respective holders.

Summary of Contents for PJ LW3000ST



































































































































Search results

Summary of Contents for PJ LW3000ST

Reviews:

Related manuals for PJ LW3000ST

Brands by name

Popular brands

Ricoh PJ LW3000ST, Field Service Manual

Search results

Summary of Contents for PJ LW3000ST

Reviews:

Related manuals for PJ LW3000ST

Brands by name

Popular brands