8.
Remove the 4 spacers (yellow circles) from the shielding bracket. (Plastic hex screw x4).
9.
Remove the cable [A] from the LVPS. (
x1)
Right Fan
1.
page 24 "Lamp Cover, Lamp Module"
2.
Remove the top cover. (
page 26 "Top Cover (Including Mini HDMI Cable and Keypad
)
3.
Remove the main board. (
page 34 "Main Board (Including HDBaseT Board (WUXGA
4.
Remove the shielding bracket. (
page 40 "Shielding Bracket with Rear Cover and LVPS"
Part Replacement
43
Summary of Contents for PJ KU600
