Ricoh pentax KP, Operating Manual

Page: 65 / 148

3
Shoo
ting
63
3
Select the AF area.
Use the frame that appears on
the monitor to change the
position and size of the AF area.
Available operations
4
Press E .
The AF area is set.
t Memo
• In R mode, [AF Active Area] is fixed to [Face Detection].
• You can switch the function of the arrow keys to AF area
change mode with X , Y , or Z , instead of pressing and
holding E . (p.102) When [Change AF Area] is assigned to
X , Y , or Z , the operation by pressing and holding E is
disabled.
You can precisely fine-tune your lenses with the camera’s
autofocus system.
1
Select [23 AF Fine Adjustment] in the E 4 menu
and press
D
.
The [23 AF Fine Adjustment] screen appears.
2
Select [Apply All] or [Apply One] and press E .
3
Select [Setting] and adjust
the value.
Available operations
4
Press E .
The adjustment value is saved.
5
Press F twice.
The camera returns to standby mode.
ABCD
Changes the position of the AF area.
R
Increases/reduces the size of the AF
area (when [Multiple AF Points] is
selected).
M
Returns the AF area to the center.
OK OK
AF Fine Adjustment
E 4
Apply All
Applies the same adjustment value to all
lenses.
Apply One
Saves an adjustment value for the lens
being used. (Up to 20 values)
D
/
R
to the right Adjusts the focus to a closer
position.
C / R to the left Adjusts the focus to a farther
position.
M
Resets the adjustment value to
the default setting.
±0 ±0
±0 ±0
3 3
23 23 AF Fine Adjustment AF Fine Adjustment
Apply One Apply One
Setting Setting
Reset Individual Settings Reset Individual Settings
Save Save Cancel Cancel