manualshive.com logo in svg

Ricoh Pentax K-1, Operating Manual, Page: 89 / 140

Share
Download
Ricoh Pentax K-1 Operating Manual Download Page 89

5

Sh

arin
g

87

Connect the camera to a computer using a USB cable.

Make sure to have a commercially available USB cable 

equipped with a micro B terminal.

Set the connection mode in [USB Connection] of the 

D

2 menu 

according to the operation to be performed with a computer.

You can check the selected connection mode on the LCD panel. 

(p.18)

t

 Memo

•

Refer to “Operating Environment for USB Connection and 

Provided Software” (p.121) for system requirements to 

connect the camera to a computer and to use the software.

•

If you intend to use the camera continuously for a long period, 

the use of the optional AC adapter kit is recommended. (p.35)

1

Set [USB Connection] to [MSC] in the 

D

2 menu.

2

Turn the camera off.

3

Open the terminal cover of the camera, and connect 

the USB cable to the USB terminal.

4

Connect the USB cable to the USB port 

of the computer.

5

Turn the camera on.

The camera is recognized as a removable disk.

6

Save the captured images to the computer.

7

Disconnect the camera from the computer.

u

 Caution

•

The camera cannot be operated while it is connected 

to a computer. To operate the camera, terminate the USB 

connection on the computer first, then turn off the camera 

and remove the USB cable.

•

If the “K-1” dialog appears on the computer screen in Step 5, 

select [Open folder to view files] and click the OK button.

Using the Camera with a Computer

Setting the Connection Mode

D

2

MSC

(default setting)

Allows you to copy the data in the memory 

card to a computer by making the computer 

recognize the camera as a removable disk. 

(p.87)

PTP

Allows you to perform tethered shooting 

by operating the camera with a computer. 

(p.88)

Copying an Image in the Memory Card

K1-OPM-EN.book  Page 87  Tuesday, March 22, 2016  5:05 PM

Summary of Contents for Pentax K-1













































































































































Reviews:

No comments