Maintenance
Group (Tab)
Item
Selections
Remarks
Registration
Tray 2
Print Test Sheet
button
Sends a PCL or GDI command to the printer to
print a test sheet.
It is disabled when tray 2 is not installed.
Adjustment
Horizontal
(-15 to +15)
step
0.34 mm per step. Range is -5 mm to +5 mm.
If the machine settings are reset to the factory
defaults, this value does not change.
Adjustment
Vertical
(-15 to +15)
step
0.24 mm per step. Range is -3.6 mm to +3.6 mm
If the machine settings are reset to the factory
defaults, this value does not change.
Registration
Bypass
Print Test Sheet
button
Sends a PCL or GDI command to printer to print
a test sheet.
Adjustment
Vertical
(-15 to +15)
step
0.24 mm per step. Range is -3.6 mm to +3.6 mm
Color
Registration
Adjust button
The engine will do color registration and density
tuning automatically.
The printer will warm up automatically after this
setting is changed.
Smart Organizing Monitor (Printer Model)
119
5
Summary of Contents for PE-MF1
