Ricoh P C311W, User Manual, Page: 191 / 224

Connecting the Machine to a Wireless Network
There are four methods for connecting the machine to a wireless network:
• Using the Wi-Fi Setup Wizard
See page 189 "Using the Wi-Fi Setup Wizard".
• Using the WPS button
See page 191 "Using the WPS Button".
• Using a PIN code
See page 192 "Using a PIN Code".
• Using the Wi-Fi Direct
See Wi-Fi Direct Guide.
Using the Wi-Fi Setup Wizard
A router (access point) is needed to set up a connection.
Checking the SSID and encryption key
The SSID and Encryption key for the router (access point) may be printed on a label affixed to the
router (access point). For details about the SSID and Encryption key, refer to the router (access
point) manual.
Configuring settings using the control panel
Make sure the Ethernet cable is not connected to the machine.
1. Check that the router (access point) is working correctly.
2. Press the [Menu] key.
ECB202
3. Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key.
4. Enter the administrator password.
5. Press the [ ] or [ ] key to select [Wireless (Wi-Fi)], and then press the [OK] key.
Connecting the Machine to a Wireless Network
189