Load the disc
Press the eject button.
1.
Place the disc on the disc tray.
Caution
When using a 120mm CD, place it in the large round depression.
❍
When using an 80mm CD, place it in the small round depression with its label side
facing up. (Writing to an 80mm CD-R/CD-RW disc is not supported. Only reading is
possible.)
❍
The face with the label on it should be up. Never place both discs in the tray at the
same time.
❍
Be careful not to touch the recording surface of the disc.
❍
Discs of irregular shapes (business card-sized, heart-shaped, etc.) cannot be used
(written nor played).
❍
2.
Summary of Contents for MP7200A
Page 8: ...fig1 Check 1 Recording surface 2 fig2 50 to 100mm 1 Back...
Page 28: ......
