14
Appendix
1. SCSI Interface and Sound
Card Installation
This sections explains how to setup the SCSI interface and the sound card in
the host computer.
For a detailed explanation, refer to the manuals for the SCSI
interface and the sound card.
(1) Turn off the power for the host computer and all peripheral devices, and
unplug the power cords.
Make sure the power is off before beginning work. If this job is done
without turning off the power, there is not only a danger of damage
to the host computer and peripheral devices, but also of electric
shock.
(2) Remove the cover from the host computer
(3) Insert the SCSI interface card and sound card into the specified bus (ISA,
VL, PCI) slots for each of them. Firmly push each card until it is all the way
in and completely in contact with its slot.
(4) Connect the SCSI interface and the sound card to the drive.
Be careful not to reverse the connectors when connecting the SCSI
interface and the sound card to the drive.
When pin 1
CD IN
Sound card
When L, R
SCSI Connector
SCSI interface
Summary of Contents for MP6200S
Page 5: ...2 The MP 6200SR Series...
Page 15: ...12 The MP 6200SR Series...
Page 16: ...13 Section 2 Appendix Appendix...
