Ricoh MP 402SPF User Manual Download

Page: 68 / 220

Placing Originals

Placing Originals on the Exposure Glass

• Keep your hands away from the hinges and exposure glass when lowering the ADF. Not doing

so may result in an injury if your hands or fingers are pinched.

• Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or be damaged.

Lift the ADF.

Place the original face down on the exposure glass. The original should be aligned to the
rear left corner.

Start with the first page to be scanned.

DQC209

1. Positioning mark

Lower the ADF.

Placing Originals in the Auto Document Feeder

Be sure not to load the original untidily. Doing so may cause the machine to display a paper misfeed
message. Also, be sure not to place originals or other objects on the top cover. Doing so may cause a
malfunction.

Adjust the original guide to the original size.

Place the aligned originals squarely face up in the ADF.

Do not stack originals beyond the limit mark.
The first page should be on the top.

2. Getting Started

Summary of Contents for MP 402SPF





























































































































































































































Search results

Summary of Contents for MP 402SPF

Reviews:

Related manuals for MP 402SPF

Brands by name

Popular brands

Ricoh MP 402SPF, User Manual

Search results

Summary of Contents for MP 402SPF

Reviews:

Related manuals for MP 402SPF

Brands by name

Popular brands