manualshive.com logo in svg

Ricoh Martini-C3.5, Operating Instructions Manual, Page: 34 / 90

Share
Download
Ricoh Martini-C3.5 Operating Instructions Manual Download Page 34

Getting Started

20

1

Internal Options

This section provides explanations about internal options.
• Fax  unit

Allows you to use the facsimile function.

• Printer/Scanner unit

Allows you to use the printer and scanner functions.

• USB 2.0 Interface Board

Allows you to connect a variety of external devices.

• IEEE 1284 Interface Board

Connects to an IEEE 1284 cable.

• IEEE 802.11b Interface Unit

Allows you to install a wireless LAN interface.

• File Format Converter

Allows you to download documents from the Document Server stored by
copier and printer functions. See “Downloading Stored Documents”, Copy/
Document Server Reference.

• Bluetooth

Allows you to expand the interface.

• Copy Data Security Unit

If a document containing embedded text for unauthorized copy guard is cop-
ied, protected pages are grayed out in the copy.

• DataOverWriteSecurity Unit

Allows you to erase data on the hard disk.

• Copy  Connector

Allows you to connect copy function.

• Gigabit Ethernet (1000BASE-TX)

Allows you to communicate with 1000BASE-TX.

Note

❒

You cannot install two or more of the following options at the same time:
IEEE 1284 Interface Board, IEEE 802.11b Interface Unit, Bluetooth.

❒

Remove the machine's Ethernet and USB ports before connecting a USB Giga-
bit Ethernet.

Summary of Contents for Martini-C3.5



























































































Reviews:

No comments