Ricoh M C250FW, Field Service Manual

Page: 252 / 324

6.Troubleshooting
240
Problem Cause Details Solution
Offset image.
Image peels
because toner
not fused to
paper.
Printing on thick paper in
Plain Paper mode.
- Check conditions in the
paper path.
Problem at Regular Intervals
Image problems may appear at regular intervals that depend on the circumference of certain
components
The following diagram shows the possible symptoms (black or white dots at regular intervals).
Defective parts Interval Target parts
OPC drum 76 mm AIO cartridge
Development roller 27 mm
Toner supply roller 23.5 mm
Charge roller 30 mm
Image transfer drive roller 61 mm Image transfer unit
Image transfer roller 25 mm
Paper transfer roller 57 mm Paper transfer roller
Fusing sleeve belt 78 mm Fusing unit
Pressure roller 78 mm
Registration roller 38 mm Transfer unit
Use a chart like the following to identify target parts.