Ricoh M C250FW, Field Service Manual

Page: 178 / 324

5.System Maintenance
166
@Remote
Menu Description
Supply Alarm Toner Sets the toner supply alarm.
[ Disable / Enable]
Toner Call Timing [ At rplcment / At NearEnd]
SC/Alarm
Setting
SC Call Sets the SC call.
[Disable / Enable ]
User Call Sets the user call.
[Disable / Enable ]
Comm. Test Call Sets the communication test call.
[Disable / Enable ]
Machine Info Notice Sets the machine information notice.
[Disable / Enable ]
Supply Auto
Ordering Call
Sets the supply auto ordering call.
[Disable / Enable ]
Machine No.
Setting
ID2 Code Display Displays the ID2 code (ASCII 17digits).
Remote
Service
CE call Performs the CE Call at the start or end of the service. [OK
/Back]
Function Flag Enables or disables the remote service function.
[ Disable / Enable]
Communication Test Executes the communication test. [OK /Back]
RCG Reg. State Displays the RCG registration status.
[0 to 2 / 0 / 1/step]
GW URL Displays the URL for RCG center.
Polling Interval Sets the polling interval.
[0 to 4294967295 / 60 / 1 sec/step]
HTTP Con Timeout Specifies the connect timeout interval when calling the RCG.
[1 to 90 / 30 / 1 sec/step]
HTTP Sen Timeout Specifies the send timeout interval when calling the RCG.
[0 to 100 / 30 / 1 sec/step]
HTTP Rec Timeout Specifies the receive timeout interval when calling the RCG.
[0 to 100 / 30 / 1 sec/step]
HTTP Retry Interval If the HTTP connection fails, specify the interval at which the
connection will be retried again.[0 to 65535 / 3 / 1 sec/step]
HTTP Retry # If the HTTP connection fails, specify the number of times to
retry the connection.
[0 to 255 / 3 / 3 counts/step]