Ricoh LD520CL, Operating Instructions Manual

Page: 451 / 956

• p.121 "Communication Result Report (Memory Transmission)"
• p.121 "Immediate TX Result Report (Immediate Transmission)"
• p.122 "Communication Failure Report"
• p.151 "General Settings/Adjust"
• p.166 "Parameter Settings"
Communication Result Report (Memory Transmission)
This report is printed when a Memory Transmission is completed, so you can check the result of the
transmission.
• You can turn this function on or off with the User Parameter (switch 03, bit 0) in the Fax Features menu.
• If user authentication is set, you can select whether to display a sender name with the User Parameter
(switch 04, bit 5) in the Fax Features menu.
• You can select whether to include part of the original image on the report with the User Parameter
(switch 04, bit 7) in the Fax Features menu.
• If user authentication is set, you can select whether to display a destination with the User Parameter
(switch 04, bit 4) in the Fax Features menu.
• For details about Parameter Setting, see “Parameter Settings”.
• The Pg(s) column gives the total number of pages. The Page Not Sent column gives the number of
pages that could not be sent successfully.
• If two or more destinations are specified, this report is printed after the fax document is sent to all the
destinations.
• If the machine is set up not to print this report and the fax document could not be successfully
transmitted, a Communication Failure Report is printed. See “Communication Failure Report”.
• p.122 "Communication Failure Report"
• p.166 "Parameter Settings"
Immediate TX Result Report (Immediate Transmission)
If you turn this report on, a report is printed after every Immediate Transmission so you have a record of
whether the transmission was successful or not.
Checking the Transmission Result (TX File Status)
121
4