Copying
68
2
Size Magnification
This function calculates an enlargement or reduction ratio based on the lengths
of the original and copy.
Measure and specify the lengths of the original and copy by comparing “A” with
“a”.
A
Press
[
Reduce / Enlarge
]
.
B
Press
[
Size Magnification
]
.
C
Enter the length of the original with the number keys, and then press
{
q
}
key.
You can enter sizes between 1 to 999 mm in 1 mm steps.
D
Enter the length of the copy with the number keys, and then press
{
q
}
key.
E
Press
[
OK
]
twice.
F
Place the originals, and then press the
{
Start
}
key.
Note
❒
To change the length after pressing
{
q
}
key in step
, select
[
Original
]
or
[
Copy
]
, and then enter the desired length.
Summary of Contents for ISC 2525
Page 46: ...Placing Originals 24 1...
Page 204: ...182 AE AE B230 7658...
