Installing the de
Installing the de
Installing the de
Installing the de
Installing the device dr
vice dr
vice dr
vice dr
vice driiiiiv
v
v
v
ver
er
er
er
er
Run the Info Technician to install the scanner drivers. To do so:
1 . Insert disk 1 of the Info Technician into the computer’s floppy drive.
2.In Windows Program Manager, select the Run command from he File menu. If you are
using Windows 95, select Run from the Start menu on the desktop.
3. Ty
pe A:\SETUP
A:\SETUP
A:\SETUP
A:\SETUP
A:\SETUP
at the command line and click OK. Substitute the
appropriate drive letter if the disk is not in the A drive.
4. Follow the on screen directions.
The scanner’s device driver is installed in the proper directory, along with the TWAIN driver.
5. Reboot the computer after the installation is complete to activate
the scanner drivers.
Mac and compatibles installation
Mac and compatibles installation
Mac and compatibles installation
Mac and compatibles installation
Mac and compatibles installation
The ImageReader FB is capable of running on a Macintosh or Mac compatibles as well as
PCs. If this unit shipped with Mac software and a plug-in driver (not all models do), read
this section for instructions about installing this scanner on your Mac system.
Scanner installation
Scanner installation
Scanner installation
Scanner installation
Scanner installation
Set the scanner to a unique SCSI ID. Attach the 50-pin SCSI terminator block to the port on
the scanner, and connect the SCSI cable to the terminator block. Pace the scanner unit In the
desired location, and route the interface cable to the computer in such a way as to assure it is
safe from possible damage due to pinching or crimping. Insert the 25-pin male connector on
the cable into the SCSI port on your Mac, or the last device on your chain. The cable can
only be inserted one way - do not force a connection. Connect the power cable as well.
Once the scanner is attached and near the location you want it, unlock the scanning mecha-
nism. The scanner is locked for transport to avoid damage to the assembly. You must unlock
the scanner
