Ricoh IM C2000 Series User Manual Download Page 117

Page: 117 / 396

Select [Network], and then click [Next].

DZX731

• The search detects devices connected to the network.
• If the error screen is displayed, see page 115 "If the Machine Cannot Be Found".

Select this machine from among the detected devices, and then click [Next].

DZC086

Printer driver installation starts.

When the installation is complete, click [Finish].

If the Machine Cannot Be Found

The "Network Connection Error" screen is displayed.

Installing the Printer Driver for Network Connection (Windows)

115

Summary of Contents for IM C2000 Series













































































































































































































































































































































































































Search results

Summary of Contents for IM C2000 Series

Reviews:

Ricoh IM C2000 Series, User Manual, Page: 117 / 396

Search results

Summary of Contents for IM C2000 Series

Reviews: