Ricoh Gestetner DSm7110, Operating Instructions Manual, Page: 82 / 232

Copying
62
2
A
Press [ Reduce/ Enlarge ] .
B
Press [ Dir. Size Mag. mm ] .
C
Enter the horizontal size of the original with the number keys, and then
press the
{
q
}
key.
You can enter sizes between 1 to 999 mm (0.1" to 99.9") in 1 mm (0.1") steps.
D
Enter the horizontal size of the copy with the number keys, and then press
the
{
q
}
key.
E
Enter the vertical size of the original with the number keys, and then press
the
{
q
}
key.
You can enter sizes between 1 to 999 mm (0.1" to 99.9") in 1 mm (0.1") steps.
F
Enter the vertical size of the copy with the number keys, and then press the
{
q
}
key.
G
Press [ OK ] twice.
H
Place the originals, and then press the
{
Start
}
key.
Note
❒
To change a length in steps
C
to
F
, press the key you wish to change and
enter the new value.