Ricoh Gestetner DSm7110, Operating Instructions Manual, Page: 66 / 232

Copying
46
2
When copying onto Custom Size Paper
Makes copies onto custom size paper from the multi bypass tray.
A
Fit the side fence to the paper size, and then place paper in the multi bypass
tray (Tray 7).
B
Fit the end fence to the paper, and then press the elevator switch on the
multi bypass tray (Tray 7).
C
Select the multi bypass tray (Tray 7) on the control panel.
D
Press the
{
q
}
key.
E
Press [ Program Custom Size ] .
F
Enter the horizontal size of the original with the number keys, and then
press
[
q
]
.
G
Enter the vertical size of the original with the number keys, and then press
[
q
]
.
H
Press [ OK ] twice.
Note
❒
If you make a mistake in step
F
or
G
, press [ Clear ] or the
{
Clear
}
key, and
then enter the value again.
❒
To register the custom size entered in
G
, press [ Program ] and then press [ Ex-
it ]
in the confirmation screen.