Ricoh Gestetner DSm7110, Operating Instructions Manual, Page: 112 / 232

Copying
92
2
Note
❒
When placing an original on the exposure glass or in the ADF using Batch,
press the
{
q
}
key after all the originals have been scanned.
❒
The machine automatically selects the reproduction ratio automatically to
the paper size.
Reference
“Edit”, General Settings Guide
Creep Adjustment
To adjust the creep between the centre and the edge of the page, select [ Magazine ]
for copying.
A
Press [ Dup./ Combine/ Series ] .
B
Press [ Book ] .
C
Select [ 1 Sided ] or [ 2 Sided ] for the original.
D
Press [ Magazine ] .
E
Press [ Creep Adjust. ] .
F
Specify the creep value using [
o
] or [
n
] .
G
Press [ OK ] twice.
H
Place the originals, and then press the
{
Start
}
key.
Note
❒
You can adjust the creep value between 0 to 99 mm (0" to 3.9") in 1 mm
(0.1") steps.
❒
If you select [ Staple: Centre ] for a magazine, set the creep value between the
centre and the edge of page. For example, specify 2 mm for 15 sheets.
❒
If you make a mistake in step
F
, press [
o
] or [
n
] to set a new value.