Ricoh G700SE User Manual Download Page 128

Page: 128 / 197

127

eless Net

orks

Viewing and Editing the Host List

The camera can be used to view and edit the host list.

Select [Send To].

• After turning the camera on, highlight

[Send To] in the expanded settings
menu (

P.98) and press

to display

the host list.

View settings.

• Press

to highlight items and press

to view. Press DISP. to

return to the previous display.

Host list

Category list

Settings list

Edit settings.

• Highlight an entry in the settings list and press

. Edit the setting

using the on-screen keyboard (

P.91) and press MENU/OK to save

changes and return to the settings list. Repeat Steps 2–3 to select
and edit additional settings.

Return to the expanded settings menu.

• Press MENU/OK to return to the expanded settings menu.

Caution ---------------------------------------------------------------------------------

Check the [Network Key] after editing [Crypt/Authentication] (

P.118). Note

that if [AES/WPA-PSK], [AES/WPA2-PSK], [TKIP/WPA-PSK], or [TKIP/WPA2-PSK] was
selected for [Cryptography] or [Authentication] in ST-10 (

P.117), changing

the [Connection Method] to [AdHoc] automatically changes [Cryptography] to
[None] and [Authentication] to [Open System].

Summary of Contents for G700SE






































































































































































































Search results

Summary of Contents for G700SE

Reviews:

Brands by name

Popular brands

Ricoh G700SE, User Manual

Search results

Summary of Contents for G700SE

Reviews:

Brands by name

Popular brands