4/14
FV-G200B1
Product Specifications Rev. 1.03
!
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO R EDUC E TH E RISK OF EL ECTRIC SHOC K, DO N OT
REMOVE C OVER (OR B AC K). NO USER SERVICEAB LE
PARTS INSIDE.
REFER SERVIC ING TO QUALIFIED SERVICE PERSONNEL.
The li ghtning flash with arrowhea d
symbol, within an equilateral triangle,
i s i nt ended t o al ert the use r t o the
pre sence of uni nsulated “dangerous
v o l t a g e ” w i t h i n t h e p r o du c t ’ s
enclosure t hat may be of suffici ent
ma gnit ude t o c onst i tut e a ri sk of
electric shock to persons.
The excl ama ti on poi nt wi t hi n a n
equilateral triangle is intended to alert
the user to the presence of import ant
operating and maintenance (servicing)
i n st r u c t i o ns i n t h e l i t e r a t u r e
accompanying the appliance.
Warning:
This equipment generates and uses radio frequency energy and if
not installed and used properly, I.e., in strict accordance with the
instruction manual, may cause harmful interference to radio
communications. It has been tested and found to comply with the
limits for a Class A computing device pursuant to Subpart J of Part
15 of FCC Rules, which are designed to provide reasonable
protection against such interference when operated in a commercial
environment.
For U.S.A.
Warning:
This digital apparatus does not exceed the Class A limits for radio
noise emissions from digital apparatus set out in the Radio
Interference Regulations of the Canadian Department of
Communications.
For Canada
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
1 Safety / Product Precautions
Safety Precautions
Product Precautions
Handle the camera with care. Do not abuse the camera. Avoid striking or shaking it. Improper handling or
storage could damage the camera.
Do not pull or damage the camera cable.
During camera use, do not wrap the unit in any material. This will cause the internal temperature of the
unit to increase.
Do not expose the camera to moisture, or do not try to operate it in wet areas.
Do not operate the camera beyond its temperature, humidity and power source ratings.
While the camera is not being used, keep the lens or lens cap on the camera to prevent dust or
contamination from getting in the CCD or filter area and scratching or damaging this area.
Do not keep the camera under the following conditions:
In wet, moist, and high humidity areas
•
Under hot direct sunlight
•
In high temperature areas
•
Near an object that releases a strong magnetic or electric field
•
Areas with strong vibrations
Apply the power that satisfies the requirements specified in this document to the camera.
Use a soft cloth to clean the camera. Use pressured air spray to clean the surface of the glass. DO not
scratch the surface of the glass.
