Ricoh FT5580, Service Manual

Page: 38 / 522

12 June 1987
Mode No. Function Data Factory Comments
Setting
55 Vsg/Vsp Displays Vsg and Vsp. Vsp/Vsg value updated
Check every 10 copies.
56 Auto ID voltage Automatically adjusts Free run starts. Auto
adjustment the auto ID reference ID adjusted
voltage. automatically.
57 Auto lD voltage Displays Voltage and Machine starts free
value display K values. run.
original) Press Start key to K = SP57/SP56
turn on. Press C/S
to stop.
58 APS Sensors Checks operation of Vl: Length Machine starts free
operation check fiber optics sensors voltage run. APS voltage is
standard original. Vw: Width automatically adjusted.
Press Start key to voltage while maintaining the
turn on. exposure lamp voltage
at 70.0 vac.
59 Bias Voltage Displays bias voltage V0: Without temperature
Press Start to turn on. ID pattern compensation.
Press C/S to stop. V1:
Developer
bias
60 Toner Density After the Start key V0: Vsg
Use this mode to
Recovery is pressed, the V1: Vsp
bring a low toner
toner supply clutch condition back to
turns on and free run normal. 100% is
starts. Free run stops selected.
and constant supply
is reset when Vsp
becomes < 1/8 Vsg.
61 Idling Period Selects idling period
0: 5 min. 0
Selection at power-up. 1: 10 min.
2: 15 min.
71 Sorter/finisher Enables sorter or
0: NO 0
operation finisher operation.
1: Sorter
2: Finisher
72 ARDF/RDH Enables ARDF or
0: No 0
operation RDH operation. 1: ARDF
2: RDH
76 Sorter Bin Sets the stack mode 0: No Iimit 0 Limit = 35 sheet/bin
Capacity quantity limit. 1: Limit Use with finnisher.
2-14