4
4-34
Performing Setup from the Control Panel
NetWare Server Poll Interval in Seconds
1–3600 [15]
Specify the interval, in seconds, at which the E-820 communicates with the Novell
print server to see if there are print jobs waiting.
N
OTE
:
If you select a short interval, the amount of network traffic increases. This may
slow down other network jobs.
Windows Setup options
Use Automatic Configuration
Yes/No [Yes]
This option appears if you chose DHCP or BOOTP as the protocol for automatically
obtaining the IP address of the E-820 (see
Choose Yes and the E-820 uses a WINS name server and automatically obtains its
IP address. Make your choice and proceed to the Server Name option.
Choose No to proceed to the Use WINS Name Server option, where you specify
whether to use a WINS name server, and then to the WINS IP Address option, where
you specify its IP address.
Network Setup
Service Setup
Windows Setup
Enable Windows Printing
Yes/No [Yes]
Enabling Windows Printing enables Server Message Block (SMB), the file and
printer sharing protocol built into Windows. Enabling SMB allows the E-820 to
be listed on the network so that Windows clients can print to a particular print
connection (Hold, Print, or Direct) on the E-820 without any other networking
software. For information on setting up a Windows computer for Windows
printing, see the
User Software Installation Guide
. Windows printing runs via
TCP/IP, so you must configure TCP/IP on the E-820 and on all computers that
use Windows printing.
