Ricoh DX 3243, Operating Instructions Manual

Page: 17 / 144

11
Guide To Components
1.
Front cover
Open for access to the inside of the ma-
chine.
2.
Control panel
Operator controls and indicators are lo-
cated here. See p.14 “Control Panel”.
3.
Exposure glass cover (optional) or
Auto Document Feeder (optional)
Lower this cover over an original on the
exposure glass. If you have the ADF, load
a stack of originals here. They will be fed
automatically, one by one.
(The illustration shows the ADF.)
4.
Master tray
Open this tray when installing the mas-
ter.
5.
Feed roller pressure lever
Use to adjust the contact pressure of the
paper feed roller according to paper
thickness.
6.
Separation pressure lever
Use to prevent double feed.
7.
Paper feed side plate lock lever
Use to lock or unlock the paper feed side
plates.
8.
Side tray fine adjusting dial
Use to shift the paper feed tray sideways.
9.
Paper feed tray
Set paper on this tray for printing.
10.
Paper feed side plates
Use to prevent paper skew.
11.
Paper feed tray down key
Press to lower the paper feed tray.
ANT046S