Ricoh D3EW, Field Service Manual

Page: 84 / 149

1.Replacement and Adjustment
80
3.
Remove tray 2 vertical transport motor 1 [A] ( x2)

When installing the motor, refer to re-installation for bypass transport motor 2 ( Bypass
Transport Motor 2 ).
Tray 2 Vertical Transport Motor 2
1.
Remove the rear right and left covers ( Rear Right Cover , Rear Left Cover ).
2.
Remove the tray 2 vertical transport motor 2 bracket [A] ( x3, x1)
3.
Remove tray 2 vertical transport motor 2 [A] ( x2)

Do not remove the damper [B] between the motor and the bracket. This damper is factory
installed and cannot be adjusted outside the factory.
Re-installation
1. When attaching the bracket to the motor, install it so that the connector openings [A] face the two