11
2. Operating the Book Folder
Setting Mode
Procedure
Changing settings
The Book Folder has five different settings. It can be set to [Auto], [Mode 1], [Mode 2],
[Mode 3] or [Off].
In [Auto] mode, the Booklet maker detects how may sheets there are in the booklet, and
automatically set the Book folder to the correct mode.
NOTE:
When the Book folder is set to [Auto] and the booklet has less than approximately 6
sheets/booklet, the Book folder will bypass the Square folding action, transporting the booklet
out to the Belt stacker.
Use the manual modes to override the auto function. There are three different manual modes
to select from.
Mode 1:
Approximately 6 to 10 sheets. Decreased amount of square forming.
Mode 2:
Approximately 11 to 15 sheets. Medium amount of square forming.
Mode 3:
Approximately 16 to 20 sheets. Increased amount of square forming.
Select [Off] to bypass the Book Folder
From the Ready screen, scroll down to BF90+ and
press the [CHG] button.
General
Select [Auto], [Mode 1], [Mode 2], [Mode 3] or [Off] with
the [arrow] button and press the [OK] button.
Summary of Contents for BOOK FOLDER BF90+
