Ricoh Aficio MP W2400, Operating Instructions Manual

Page: 45 / 54

Changing the Folding Finisher Settings
37
5
Changing the Folding Finisher Settings
This section explains how to change the Folding Finisher settings.
Available Settings
The Folding Finisher settings can be changed using the control panel. This section
explains the items that you can set.
❖
Adjustment of the Fan fold width
Makes fine adjustments to the width of fan folds.
• Item number: 1
• Default: 0.0 mm
• Value range (0.5 mm units):
o
6.0 to
n
6.0 mm
❖
Adjustment of margins
Sets the margin when fan-folded A0 K or A1 KL paper.
• Item number: 3
• Default: 40 mm
• Value range (1 mm units): 35 to 40 mm
❖
Time to wait until starting paper feed
Sets the wait time until the paper is fed after the front edge of paper set on the
Paper Feed Table touches the Folding Finisher.
• Item number: 11
• Default: 1 second
• Value range (1 second units): 1 to 5 seconds
❖
Time to suspend manual paper feed
Sets the length of time that paper placed on the Paper Feed Table pauses after
starting to be fed.
• Item number: 12
• Default (second): 1 second
• Value range (1 second units): 1 to 5 seconds
❖
Method of starting folding operation
Sets whether the Folding Finisher starts folding paper placed on the Paper
Feed Table automatically, or after the
{
Start
}
key is pressed.
• Item number: 13
• Default: 0 (fold automatically)
• Value range: 0 (fold automatically), 1 (fold after the
{
Start
}
key is pressed)